5.5" long and 2 Oz
size, Clear vertical grain Alaskan Yellow Cedar, stainless steel thru-wired, Krok
600 lb swivels.
This is an exact copy of an original Mac Pikie
metal lip swimmer.
Mac made one of the best lures on the market and this
was one of his favorite sizes. And a favorite of many!
All kits are
sanded out to 150 grit and require minimal sanding.
Very nice swim action and is designed primarily as a big bass lure.
Will dig on a retrieve about 4-6' with a very nice tail wiggle! Casts very well for a metal lip swimmer too!
All components are included except for split rings and hooks which we
recommend a pair of VMC 2/0 treble hooks
for the belly
of this lure.
We use only USA made components in our kits with the exception of Krok 300 lb stainless swivels in this lure.
Our lips are made in house too!
swimmer is a good intermediate kit. It requires gluing the lip in,
gluing the weight & belly grommets in,
re-drilling the hole through the weight with a
small size drill bit, minor
sanding, and painting/finishing.
These kits are all turned on our dedicated kit cnc machine and drilled
with precision and duplication second to none!
Can be painted with
Salty's Lure Paint, Createx Air brush
paints, or with acrylic paints and a small brush
from AC Moore,
let them dry thoroughly and coat with a few coats of
clear spray paint or brush with epoxy etc in thin coats for more
Lures need to be finish sealed to prevent water intrusion. More
information on our free lure forum linked above.
We carry a full line of epoxy topcoats, hooks, paint, etc here: