6" long and 1.5 Oz
size, stainless steel thru-wired this our newest kit and another Salty's
provide you a CNC machine routered, through-wired body in side view 2D,
pre-cut lip slot and you taper the tail and head
to your liking with
either sandpaper or by carving in the vertical/top to bottom view.
components are included except for split rings and hooks which we
recommend VMC 2/0 treble hook for the belly
and a 2/0 treble or 4/0 Dressed Siwash hook on the tail of this lure
with #4 split rings.
We use only USA made components in our kits!
Very simple constant retrieve on this
lure. It will dive 4-6'.
This kit is for advanced lure
builders or someone that wants to try something new with a handcarved
You can tailor the shape to your liking! See the pictorial linked off
the kit page for more images and instructions on how to finish these.
Can be painted with
Salty's Lure Paint, Createx Air brush
paints, or with acrylic paints and a small brush
from AC Moore,
let them dry thoroughly and coat with a few coats of
clear spray paint or brush with epoxy etc in thin coats for more
Lures need to be finish sealed to prevent water intrusion. More
information on our free lure forum linked above.
We carry a full line of epoxy topcoats, hooks, paint, etc here:
This product can expose you to chemicals
including Wood Dust & Lead, which is
known to the State of California to
cause cancer and or birth defects or
other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
Saltys is a small business and exempt
from California Proposition 65 warning
requirements, but choose to provide them
voluntarily for known chemicals. Wash
hands after handling, DO NOT smoke or
eat with contaminated hands! Keep away
from children and do not ingest! USE