1.5" long and 1.25 Oz
size, stainless steel thru-wired this is a great little swimmer!
1/2" holographic molded eyes!
All kits are
sanded out to 150 grit and require minimal sanding.
components are included except for split rings and hooks which we
recommend 1/0-2/0 treble hook for the belly
and a dressed stub on the tail of this lure. We do not recommend
using a tail hook on this swimmer as it will foul.
We use only USA made components in our kits!
simple retrieve on this lure, it will tail wag right on top.
swimmer is a good intermediate kit. It requires gluing the lip in, minor
sanding, and painting/finishing.
These kits are all made on our dedicated kit cnc machines and drilled
with precision and duplication second to none!
Can be painted with
Salty's Lure Paint, Createx Air brush
paints, or with acrylic paints and a small brush
from AC Moore,
let them dry thoroughly and coat with a few coats of
clear spray paint or brush with epoxy etc in thin coats for more
Lures need to be finish sealed to prevent water intrusion. More
information on our free lure forum linked above.
We carry a full line of epoxy topcoats, hooks, paint, etc here:
These products can expose you to chemicals
including Wood Dust & Lead, which is known to
the State of California to cause cancer and or
birth defects or other reproductive harm. For
more information go towww.P65Warnings.ca.gov.
Saltys is a small business and exempt from
California Proposition 65 warning requirements,
but choose to provide them voluntarily for known
chemicals. Wash hands after handling, DO NOT
smoke or eat with contaminated hands! Keep away
from children and do not ingest! USE COMMON
images and pages Copyright 2002-2018 by Scott
**Flat rate shipping does not include liquid
items, wood squares or oversize items.
These items may be additional depending on size
All items under 150lb are subject to Federal
Sportfishing Excise tax.
More information can be found on our sales