4.5" long and
2.5 Oz
size, stainless steel thru-wired this is a great swimmer!
Oversized 1/2" molded eyes!
All kits are
sanded out to 150 grit and require minimal sanding.
All components are included except for split rings and hooks which we
recommend a VMC 4/0 treble hook for the belly
and 6/0 Siwash on the tail of this lure. We recommend some "Zap a
Gap" glue on the hook to keep the tail glued on.
We proudly use only USA made components in our kits!
Very
simple retrieve on this lure, use a loop knot on the front and it will tail wag right on top.
This
swimmer is a good intermediate kit. It requires gluing the lip in, gluing the eyes/grommet in, minor
sanding, and painting/finishing.
These kits are all turned on our dedicated kit cnc machine and drilled
with precision and duplication second to none!
Can be painted with
Salty's Lure Paint, Createx Air brush
paints, or with acrylic paints and a small brush
from AC Moore,
let them dry thoroughly and coat with a few coats of
clear spray paint or brush with epoxy etc in thin coats for more
durability.
Lures need to be finish sealed to prevent water intrusion. More
information on our free lure forum linked above.
We carry a full line of epoxy topcoats, hooks, paint, etc here:
Lure Hardware
|